This module is voluntarily separated from the legacy sampler. It allows more complex routing possibilities.
This module is automatically created from the waveform outlet.
There are 3 zones of possible actions
Zone 1: set/modify the cursor position Zone 2: set/modify the loop selector position Zone 3: marker zone: create (dbl-click), delete (dbl-click on an existing marker), move.
Waveform array to display (see waveform parameter in the legacy sampler module).
Second waveform array to display.
Start reading position.
End reading position.
the file is read between the start and end position
Sets or gets the current reading position.
Indicates the new cursor position.
The cursor position can be set by clicking on the top of the wavedisplay (zone1). This parameter can be connected to the pos inlet of the legacy sampler module.
Displayed caption of the object. Click to enter a new name.
Get or set the total number of markers created. Can be used to clear the markers (set it to 0).
Array which contains the markers position: the length of the array is the total number of markers. Each element is the value of their respective position (from 0..100%).
Button to insert a new marker at the current position.
When the value changes, goes directly to Nth marker. If the value is -1, does nothing.
Reorganize automatically the markers
Determines if parameters of this object are saved in the preset-panel.
Parameters of the this object can cross faded when you recall a preset in the grid.
Optional setting, does not appear on all objects.
When ON, this object will be randomized when using the randomize command of its patch.
When ON, this object will be reseted to its default value when using the reset command of its patch.