Test ArtNet network

This chapter describes how to test ArtNet devices connected to the network.

Usine will send 512 random values sequentially on 16 universes (from 0 to 15) on a node / sub-net devices. This operation will be repeated 10 times.

After the test all 512 values on all the 16 universes will be reseted to 0.

Lanch Usine and click on the setup menu button.

Then click on the LIGHT tab to open the DMX-ArtNet settings:

Activate Artnet by clicking on the ArtNet active switch:

Activate Broadcast option by clicking on the broadcast switch:

Set the default ArtNet output port:

Set the target node and sub-net:

Click on start test artnet button:

See also

version 3.0.141

Edit All Pages